Hey all. Quick question for ya. What fairings are interchangeable with a 2006 zx14. Want to put the newer fairings on mine . Cheers

I say...virtually none are interchangeable.You're trying to go from an 06 to a 2012 and up,yes?Lots of fastener changes and positional interlocking tabs and such.I don't think it'll be possible for ya..2012's and up went with a very different fitment pattern.

Looks like you are going to be out the wallet to find out. However, I run a used 2008 silver tank on a 2013 frame. That means the tank mount points line up. Which now says the front panel should have those frame mount points off the front of the tank, then where to the front fairing mounts behind the back of the neck. Which presents the next panel off the front panel points.

In other words; the front tank panel [sides] calls the rest of the full fairing.
In other words; the next point to the frame to side panel says if the same brackets and frame blind-hole mounts have not changed... yes it will work.
In other words; the lower engine to lower panels look the same and are positioned in the same locations. All from memory so I could be wrong I crack that wallet open for you.

Like Grn said; about the only interlock is at the tank to front top forward tank panel to the back of the neck. From there, the side interlocks call what gen to use. Because the next interlock is the larger side fairing. The later side grill with the wider slats has a slot insert to the larger side panel. The first gen grill was more bolted in, and not as hard to remove as the later panel.

The front fairing mount is also from memory. This skeletal faring hanger also looks the same, as are the mirror mount positions that will hold the nose with all the lights, etc.

I've seen one done here in SA, the guy said he had to modify a bracket on the side. Also you will need new headlights. The Gen two is different.

* Last updated by: untamed on 2/21/2017 @ 11:37 AM *