Move Close
Welcome to zx14ninjaform.com!

You are not logged in.
New Topic Reply
Next Page

Page: 1

Previous Page

Thread: 190/55 and 43

Created on: 08/23/15 11:16 AM

Replies: 4

cwrzxr



Joined: 07/26/15

Posts: 2

190/55 and 43
08/23/15 11:16 AM

I've ordered a set of Metzeler z8, 190/55 and also want a steel 43 rear sprocket. A local guy has a 2012 zx14r and put 180/55 with 43 rear. He said it's won't work because of TC, it stumbled at low speeds. If it will work, I need a steel 43 rear sprocket. How makes one?

Link | Top | Bottom

Auron


Auron's Gravatar

Joined: 01/25/12

Posts: 574

RE: 190/55 and 43
08/23/15 1:02 PM

I ran a 180/55 with no issues. If he says the 190/55 wont work just fine hes trying to sell you something


* Last updated by: Auron on 8/23/2015 @ 1:04 PM *

Link | Top | Bottom

zx14rider345


zx14rider345's Gravatar

Location: Noreaster

Joined: 10/12/13

Posts: 459

RE: 190/55 and 43
08/23/15 1:28 PM

The tire size won't matter, if you have 2012 or newer some say they have experienced stuttering when adding teeth to the rear sprocket size. So if you go up from 42 to 43 you may have stuttering issues or you may not. Some say they get it some say they don't.



2012 ZX14R, 2016 BMW S1000XR

Link | Top | Bottom

carabuser


carabuser's Gravatar

Joined: 09/05/12

Posts: 1731

RE: 190/55 and 43
08/23/15 2:02 PM

If you go 43 in the rear, go one down in the front if you get the stutter ....



2012 ZX 14R, Cblast ECU Flash, (RECOMENDED !!!!) 2 Brother slipons, ZG marc 1 windscreen, yosh fender eliminator, Pazzo Levers, Powerbronze hugger, heli bars, competition werks footpegs, Throttlemeister Cruise Control, CF Heel Guards,

Predator Race Team #14
Hayabusa
1980 GS 1100
1978 GS 550
1968 CL 350
1972 TS 90
RM 125, YZ 250, CR 500. Taco 22 LOL !

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
Winston Churchill

'The trouble with Progressive's is not that they're ignorant; it's just that they know so much that isn't so.' - Paraphrase of R.R.

Link | Top | Bottom

hagrid


hagrid's Gravatar

Location: pittsburgh

Joined: 02/16/12

Posts: 2210

RE: 190/55 and 43
08/23/15 6:04 PM

If it will work, I need a steel 43 rear sprocket. How makes one?

SuperSprox makes anything you specify.



Yoshis!! GO NINJEE!!!

Fat chicks at Wal-Mart: NOT RECOMMENDED

Link | Top | Bottom


Welcome to zx14ninjaform.com!
 
New Topic Reply
Next Page

Page: 1

Previous Page

New Post

Please login to post a response.