ECU From '07 ZX14-Will it Fit/Work?

zx1441xz

Location: Augusta, GA

Joined: 11/28/10

Posts: 58

ECU From '07 ZX14-Will it Fit/Work?
02/01/13 12:48 PM

Hello All,

A buddy of mine is parting out an '07 ZX and I am considering purchasing the ECU to have it flashed and keep my stock as a backup. Will there be any problems? Also, what would be a good price to offer?

Sorry if this topic has been hammered to death.

Link | Top | Bottom

dragking

Joined: 04/22/11

Posts: 2464

RE: ECU From '07 ZX14-Will it Fit/Work?
02/01/13 4:33 PM

WOW. I'm the wrong person to answer this, but I think you're asking too much. There has to some parameters typical to the 1st generation that a re-flash won't over ride. Just send your ECU to Guhl or if you live close, ride over there, I don't think you will regret it. I will be sending mine. Check ebay, there are a lot of cheap ECU in case you don't want to make your buddy an offer he CAN refuse.

2006 Ebony Black ZX14, Flies gone, Power Commander V, Brock's CT-Single, Brock's Street/Race Map, Schintz Racing Flash, Brisk Racing Spark Plugs, BST Wheels with World Bearing Ceramic Bearings, Scott Rotary Steering damper, Ohlins KA544 shock, FPK Ohlins kit, Brembo GP4 RX Calipers, Brembo RCS 16, Brembo RCS 19 with no Drag Half Lever, Spielger Front and Rear Brake Lines, Braketech Axis Cobra Front Rotors, Galfer Rear Wave Rotor, Shorai LFX21A6 battery, Sato Racing frame sliders, Zero Gravity Racing Screen/MRA double bubble Racing Screen, Rizoma universal lux billet grip, Rizoma Next Fluid tanks, Rizoma Swing Arm Spools, Pro-Bolt tasty Nuts, Gilles rearsets, Sargeant seat, Geelong small tank protector, Geelong Hugger, Bike master magnetic oil drain plug, vortex gas cap, cox radiator guard, Xenon HI's and Low's.

Link | Top | Bottom

hagrid

Location: pittsburgh

Joined: 02/16/12

Posts: 2210

RE: ECU From '07 ZX14-Will it Fit/Work?
02/01/13 9:23 PM

Too many differences between gens 1 and 2 to make what you are proposing feasible.

Traction control functionality to name one.

Yoshis!! GO NINJEE!!!

Fat chicks at Wal-Mart: NOT RECOMMENDED

Link | Top | Bottom

Grn14

Location: Montana

Joined: 02/25/09

Posts: 15511

RE: ECU From '07 ZX14-Will it Fit/Work?
02/01/13 11:03 PM

The firmware COULD be in there already.Who knows?A zx14 2009 with abs?Hmmmmmm.The frame holes are identical for fitment of the abs hardware;)The abs units are for sale...including piping.The calipers are the same mounting spots.Maybe all that earlier ECU needs is an unlock of a program?????The Connie's had ABS for how long now?Those tone wheels....wonder if they fit an earlier model zx14.....ooppps...got off subject here a tad....sorry.

* Last updated by: Grn14 on 2/1/2013 @ 11:05 PM *

Link | Top | Bottom

Hub

Joined: 02/05/09

Posts: 13719

RE: ECU From '07 ZX14-Will it Fit/Work?
02/08/13 9:12 AM

Here's the mix and match for this one.

2006-2007 = 440cc injectors
2008-2009 = 330cc injectors
2010-2011 = ??

2012-2013 = Totally different animal having to do with the auto-idle system. No more needing to set the idle with a cable. So you need that ECU and that throttle body to mix and match these gens.

So yes, swap the matching ECU w/injector between gens. That means you'll run rich if you use an '06 injector with an '08 ECU. No problem with all the sensors. I believe they are preset with the same output numbers. So no worry about changing those.

Tormenting the motorcycling community one post at a time

Link | Top | Bottom