Does anyone know if the zx-14 wheels will except 2005 zx-10 brake components ?????????
Created on: 04/09/12 11:27 AM
Replies: 6
chapman05
Joined: 04/09/12
Posts: 5
DogoZX
Location:
Joined: 02/26/09
Posts: 2889
RE: Zx-14 wheels
04/09/12 11:45 AM
Rotors are the same pattern and offset, but gen1 10r rotors are 300mm and zx14's are 310mm.
The calipers and master from a 10r will bolt right on to a zx14, but you'll need to use the 10r lever.
The brakes on the gen1 10r are all around terrible though, not sure why you'd want to do any of this.
Saw your post about wheels too... The gen1 10r front wheel and zx14 front have different axle diameters... The rears can be swapped with custom spacers. OSR sells a kit to put 10r wheels on a zx14. It's an inexpensive, light weight alternative to buying billet, magnesium, of CF aftermarkets.
* Last updated by: DogoZX on 4/9/2012 @ 11:46 AM *
chapman05
Joined: 04/09/12
Posts: 5
DogoZX
Location:
Joined: 02/26/09
Posts: 2889
RE: Zx-14 wheels
04/09/12 11:55 AM
Gotcha... I have an '05 10r.
The zx14 wheels are heavy... just a heads up... but, if you wanna do a swap, you'd need custom spacers for the rear wheel and atleast new bearings with a smaller ID for the front.
DogoZX
Location:
Joined: 02/26/09
Posts: 2889
RE: Zx-14 wheels
04/09/12 12:07 PM
Oh... different rear sprockets and rotors too. Infact, IIRC, guys have to use the 10r rear rotor, caliper and hanger when they swap.
* Last updated by: DogoZX on 4/9/2012 @ 12:08 PM *
chapman05
Joined: 04/09/12
Posts: 5
DogoZX
Location:
Joined: 02/26/09
Posts: 2889
RE: Zx-14 wheels
04/09/12 12:19 PM
You're welcome.<---Click
New Post
Please login to post a response.