Nels with 2wheel Dynoworks is flashing my ECU on Thursday. He worked with Cblast in the development of the 14R flash, so I know I'm getting the best flash available.

Heck yeah you are, I will probably see ya down there, I'll be by the shop Thursday!

He'll be in Tacoma at Redline Motorsports.

I'm planning on being there around 4:30-5:00 for my flash. Swing by, man. It would be awesome to meet you.

Yessir, Thursdays and Fridays is usually at redline and I should still be around, be great to meet! Maybe we get a little ride after we flash her! I can get to see your reaction firsthand!

cograts to everbody with a Brocks system!! That's the way I may go some day.

If it ever scrapes, it will be at the bend in the midpipe below the footpeg. That's where my Cannon scrapes but only in very hard cornering and I think lower tire pressure is also a factor. I don't think most will touch on the street unless you are leaned hard in an off camber corner maybe accompanied by a small hump in the road under the exhaust. If you have any more than 1/4" chicken strips, I doubt you will ever scrape a pipe.

I definitely ask my bikes for all of the cornering clearance they can give. I was running Supercorsa SC2 slicks with a 200/60 rear on my ZX-10R, and still spun it up if I caned her too hard coming off the apexes. I was getting knees and elbows on the deck, so if there's any part of the 14R that touches down early, I'll eventually find it.

Proper suspension setup really seems to be what effects clearance the most. As everyone else has said, it's a $15k bike. $700 for a proper suspension kit is a drop in the bucket. And if I still need to do some wonky body positioning to make up for a low pipe, so be it. This bike is too amazing to complain about a few degrees of missing lean angle.

I touch body panels on both sides with proper suspension setup long before pipes or anything else. The side panels scrape first with a set of rear-sets. At least on Priscilla.

That's fine with me. I'm not expecting supersport level handling from this pig. I just want to know im not going to be grinding hard parts unnecessarily.

A few battle scars from cornering are a-ok with me!