what about the zx 10 front fender I heard that it'll keep my engine cooler (my right leg get toasted after 2 hr plus trip on hot days), and do I absolutely need a gen 3?... I ve found two 2008-09 on e bay for $99-$150 but am not sure they are gen 3. do gen3 zx 10 fenders need any mod b4 install?
Most guys use a '04-'07 zx10r or '05-'08 zx6r front fender. It requires that you purchase or make a set of brackets... The brackets have become harder to come by these days... not sure if anyone is making them at the moment... but there's a guy selling a fender and brackets here:
http://www.bikeland.org/board/viewthread.php?FID=3&TID=61368&set_time=
Blue07 modded his stock fender brackets to mount up a gen 3 zx10r fender. The thread is here:
http://zx14ninjaforum.com/messages.cfm?threadid=F44C3B0A-1372-66AE-3BDDBC82FB0AF775&page=1&searchTerm=zx10 fender#1
I ordered my brackets from Ohlins, but they won't work with stock forks.
I ve found these yterday: http://www.motostrano.com/ribarsl
Not sure if those would work on the zx14 or not... the big ninja uses this style:
None of the bar ends I've seen for hollow bars have that "recess"... and without it, there will be a big gap between the grip and bar end... especially with Rizoma grips. Since the throttle side grip also replaces the the throttle tube, and the throttle cable housing sits in a groove, it cannot be "fudged" over the fill that gap.
* Last updated by: DogoZX on 4/24/2011 @ 2:09 AM *