Romans
Those last bottom pis were the last small little ride I did. Do you want me to ride it further and at higher RPMS? Those are the only numbers that it gave me from 0 to 4500 rpm.

Do you want me to ride it further and at higher RPMS?

No, your AFR table still is not right. Apply the recommended changes to the fuel map. After you do this your fuel #'s will have changed. That is what I need to see.

Post a copy of your new fuel map.

The pictures on page one at the bottom that say 16.1 thru 16.6 were the last numbers that I got when I rode it for a mile or two at 4000 - 4500 rpm it said 50%. That is the only data that it applied. I had cleared all except what you told me to input for the AFR ratios. I shifted from 1st thru 6 gear. and came back to the house the same way. don't know what I'm doing wrong.

That is the only data that it applied. I had cleared all except what you told me to input for the AFR ratios. I shifted from 1st thru 6 gear. and came back to the house the same way. don't know what I'm doing wrong.

We need to talk, I think some really simple things getting missed here. Live would be much faster and easier,,,, What is your time zone ???? We don't want to run the risk of a online misunderstanding.

Do you have pcV software ? if you do I can send you My AFR Table to copy ??????? Faster ? Let me know I don't mind helping.

* Last updated by: Romans on 1/18/2012 @ 8:31 PM *

Im in Florida EST. I really could use all the help I can get on this, I really need the bike for transportation now. I will be at home off from work at 7:30 pm. you can email ma at ninjarider2008 at yahoo.com and I will send my number or you send yours and the time to call you that way we can be on the same page. thanks wilson

Ninjarider2008 I live in Cape Coral FL and I wish I could help with your problem but if your ever in my area hit me up so we can meet/ride!

ROMANS
I will be home anytime after 1:00pm working on the bike. I will check my email to see if you reply back. remember to email me at ninjarider2008 at yahoo dot com so I can email you my number or yo can email me yours that way I can call you up and you can most likely get the answers you need on my turbo zx14. Thanks Wilson

COOTER if I come down your way I will let you know. Thank

* Last updated by: ninjarider2008 on 1/21/2012 @ 2:59 AM *

Pm sent.

[img]http://www.zx14ninjaforum.com/userfiles/ninjarider2008/PCV%20smooth%20to%2010%20PSI%20MAP.jpg
This is the map that I got from jones Smooth up to 10psi

Hey, how did you do that lol.

Ok, I assume you tried it. Let me guess lean down low backfires ?

Just got home from work. Looking at your maps now, Call Me if you are online and we will get started.