Here you go Wolfmann.
Recieved my hugger yesterday & firstly I must say how very well it was packaged, no chance of getting damaged.
Even the carton was clearley marked VERY FRAGILE on all sides.
Opened it up & was very happy with the quality & finish of it.
I have seen a couple of other brands & this one leaves them for dead.
I removed the stock chain guard & 2 x screw holes lined up perfectly with the new hugger holes on the LHS.
On the RHS on the hugger there are 2 holes fairly close together which didn't line up with anything but was very close to the bracket that holds the brake line on the swingarm, so I made a small simple bracket that attached them. I also replaced the screw that secures the bracket which holds the brake line on the swingarm with a longer one that goes through long enough to fit new bracket onto.
The whole process only took about 1.5 hrs to complete and I am very very happy with the end result.
Heres a few pics I took along the way, Hope it helps :)
A couple of before pics.
The 2 holes in hugger.
The small bracket I made up.
Bracket fitted to hugger.
Close up of the new hugger bolts and the new longer bracket bolt.
The end result.
Akropovic Headers, Leo Vince EVO2 carbon twin exhaust system, Radguard protector, Tinted Tail Light,
Zero Gravity DB screen, BMC air filter, Driven D-Axis grips, Full PIAA lights, Rated R 1" bar risers,
Stem GPS mount, 12v outlet, Rated R frame sliders, Carbon heel guards, Custon rear fender, Seat Cowel,
Custom shaped seat, Brocks billet Adj Sidestand, Custom ECU tune by Oz-Racing, HyperPro RSC Active Damper.