Tank protector

jimmymac

Location:

K.C. MO Northland

Joined: 07/02/14

Posts: 454

Tank protector
07/11/14 7:54 PM

I did a search, but couldn't find anything. I just bought a leftover 2012 R, and it has the factory tank protector. Can I just heat it up and peel it off pretty easily? I've never seen a bike that comes with one stock. I want knee protectors too, and want it all to match.

Let's roll

Link | Top | Bottom

wfozx14

Location:

Upstate New York

Joined: 12/16/12

Posts: 891

RE: Tank protector
07/11/14 8:39 PM

check out Tech Spec, really good quality.

Ohlins forks,Ohlins shock,GPR steering damper, Brembo brake master cylinder/lever,Brembo clutch cylinder/lever,vortex rearsets, Two Bros carbon race series 4 into 1 exhaust,Dunlop Q3's,galfer ss brake/clutch lines, V1 radar detector,zumo 550 gps,auto com communication,PDM 60 power distribution module,zero gravity DB wind screen, vortex rear sprocket,EK zzz chain, Carpenter racing CCT, Romans flash, Annitori racing quickshifter.

Link | Top | Bottom

Rook

Joined: 03/28/09

Posts: 20814

RE: Tank protector
07/12/14 7:51 AM

You may opt to leave the stock guard in place and apply TechSpec to the sides of the tank and/or anywhere else you need grip or protection from contact. TechSpec is a self adhering rubber that comes precut or in larger pieces you can cut yourself. Good stuff. I have The Snakeskin texture. Sticks very well and will not move. Might have a hard time getting it to adhere around the more severe corners on the body panels but if that is necessary, you can always custom cut some smaller pieces to round the small radius.

08 MIDNIGHT SAPPHIRE BLUE ZX-14 Now Deceased, will be resurected 2024 ZX-14R bran friggin NEW!

Link | Top | Bottom

jtemple

Joined: 07/07/12

Posts: 470

RE: Tank protector
07/12/14 7:59 AM

Removing the OEM tank pad from a 14R is NOT for the feint of heart. A few folks around here have done it, and it is no easy task.

I put stomp grip on mine. Grips, protects the paint, and doesn't cover up that pretty green finish.

Link | Top | Bottom

WildPete

Joined: 06/20/13

Posts: 92

RE: Tank protector
07/12/14 1:49 PM

jtemple, Your section on gill side turned out good. I gave up as I couldn't get it aligned right no matter how much I tried. I just have the two sections currently on the bike.

Link | Top | Bottom

ZX14MAN64

Joined: 08/17/12

Posts: 1237

RE: Tank protector
07/12/14 3:36 PM

I personally love the stock pad. Looks like s dinosaurs spine!!!

I have the cradle Kawasaki knee pads from the UK. Got em on ebay for $80. The only OEM pads out there from what I understand. Don't match the stock center pad, but they Really look sharp.

* Last updated by: ZX14MAN64 on 7/12/2014 @ 3:37 PM *

Link | Top | Bottom

carabuser

Joined: 09/05/12

Posts: 1731

RE: Tank protector
07/12/14 4:03 PM

Here's a picture of the OEM ones, not a great picture, but you get the idea ....

2012 ZX 14R, Cblast ECU Flash, (RECOMENDED !!!!) 2 Brother slipons, ZG marc 1 windscreen, yosh fender eliminator, Pazzo Levers, Powerbronze hugger, heli bars, competition werks footpegs, Throttlemeister Cruise Control, CF Heel Guards,

Predator Race Team #14
Hayabusa
1980 GS 1100
1978 GS 550
1968 CL 350
1972 TS 90
RM 125, YZ 250, CR 500. Taco 22 LOL !

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
Winston Churchill

'The trouble with Progressive's is not that they're ignorant; it's just that they know so much that isn't so.' - Paraphrase of R.R.

Link | Top | Bottom

jimmymac

Location:

K.C. MO Northland

Joined: 07/02/14

Posts: 454

RE: Tank protector
07/12/14 7:33 PM

Thanks for the heads up, Guys. My bike came from the Dealer with a scratch in the tank, that I want to cover up. They ordered a couple of Color rape pens, but I'm sure I won't like the finished product. We'll see how it goes. I'll be sure and show before and after pics to keep you guys posted. Thanks again.

Let's roll

Link | Top | Bottom

sweetfa65

Location: South Australia

Joined: 07/22/13

Posts: 371

RE: Tank protector
07/13/14 4:40 PM

I did the tank pad replacement on mine and fit a Raskal Graffix pad. They're a decent size and the 14R ones suit the bike well. Getting the old one off is a proper bitch though.

Look ahead, relax & GO HARD!
2013 ZX14R SE ABS (aka:ANIML).Polished wheels,Supersprox sprocket,clear filmed paintwork,frame caps,rear seat cowl,ceramic coated Akrapovic headers,carbon Yoshimura R77s,H9 modded lighting,Zero Gravity screens,Ventura rack,tinted lenses,Genmar risers,Throttlemeisters,Pazzo levers,custom stainless radiator guard,Yoshimura fender eliminator,Woolich Log Box Pro,Zeitronix O2 controller,ECU flash.

Link | Top | Bottom