I doubt i will need new clutch plates but I see in the SM they stipulate different service limit thickness for clutch plates with three different part numbers. I presume there are three different kinds of fibers in the stack. Can you tell me how I will know which fibers are -0030, which are -0031 and which are -0032? i have them in the correct order they were removed in but I don't know which is supposed to be which or how many of each.

Hey Rook, Here are some pictures showing the different fibers. The inner most plate (13088-0032) has the smallest inside diameter so the two large/thin washers can fit inside. Then the eight (13088-0030) plates that are all the same. Then the one (13088-0031) plate that has the cork extending nearly edge to edge last. The pictures show the plates being left to right = outside to inside. Hope that makes since!

* Last updated by: eurichs07 on 12/12/2016 @ 7:06 PM *

Thank you so much eurich. If I find any out of spec, I'll take yours at your price.